EasyManua.ls Logo

EGO Power + HTX6500 - Safety Instructions; Safety Symbols; Symbol Meaning; General Power Tool Safety Warnings

EGO Power + HTX6500
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500 5
EN
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
WARNING: Residual risk! People with electronic
devices, such as pacemakers, should consult their phy-
sician(s) before using this product. Operation of electrical
equipment in close proximity to a heart pacemaker could
cause interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all repairs
and replacements should be performed by a qualied
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the expla-
nations with them deserve your careful attention and un-
derstanding. The symbol warnings do not, by themselves,
eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including all
safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION before using this tool. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARN-
ING, or CAUTION. May be used in conjunction with other
symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over eye
-
glasses or standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Indicates a potential personal
injury hazard.
Read Opera-
tor’s Manual
To reduce the risk of injury,
user must read the operator’s
manual.
Do Not Expose
To Rain
WARNING: Do not use in the
rain or leave outdoors while it
is raining.
XX
Noise
Guaranteed sound power
level. Noise emission to the
environment according to
the European community’s
Directive.
CE
This product is in accordance
with applicable EC directives.
WEEE
Waste electrical products
should not be disposed of with
household waste. Take to an
authorized recycler.
65cm
Blade Length The length of the blade
Ø33 mm
Cutting
Capacity
Max. Cutting capacity of the
blade
V Volt Voltage
Direct Current
Type or a characteristic of
current
.../min Per Minute Revolutions per minute
mm millimeter Length or size
cm Centimeter Length or size
n
0
No Load Speed Rotational speed, at no load
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specications provided with this
pool tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
N O
#2
#1
Original instructions

Table of Contents

Related product manuals