Eilon Engineering RON 2501 - 4.5 Totalizer Functionality

Fig # 1A WIN2000 HyperTerminal output file of
a session of continuous measurements over
a few seconds
( RTC not installed, Data Logger installed ) :
LOAD UNITS TARE FUNCT.
0.000 M. TON Gross DATA
0.000 M. TON Gross DATA
0.000 M. TON Gross DATA
0.000 M. TON Gross DATA
0.000 M. TON Gross DATA
0.000 M. TON Gross DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
0.000 M. TON Net DATA
0.000 M. TON Net DATA
0.000 M. TON Net DATA
0.000 M. TON Net DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
0.315 M. TON Gross DATA
1.015 M. TON Gross DATA
1.010 M. TON Gross DATA
1.715 M. TON Gross DATA
1.710 M. TON Gross DATA
1.710 M. TON Gross DATA
1.710 M. TON Gross DATA
ID
-0.335 M. TON Gross D.L.1
0.385 M. TON Gross D.L.2
1.390 M. TON Gross D.L.3
0.315 M. TON Gross D.L.4
1.015 M. TON Gross D.L.5
1.715 M. TON Gross D.L.6
Fig. # 1B scanned printout of Ron with RTC and DataLogger installed :
FIGURE 1.0 Each measurement generates only one line.
21