To Next Page
S
Sarah CarlsonAug 10, 2025
Why does my EINHELL GC-DP 1340 G switch off after briefly running?
- SShawn Kelley MDAug 11, 2025
Your EINHELL Water Pump might be switching off shortly after starting due to a couple of reasons: * The motor circuit-breaker might be tripping because of excessive water contamination. If this is the case, unplug the power and clean the equipment and shaft. * Alternatively, the water temperature may be too high, causing the motor circuit-breaker to switch off the equipment. Ensure that the water temperature does not exceed 35 °C.
General
