EINHELL GC-SP 2275 User Manual

GB
- 17 -
8. Cleaning, maintenance and
ordering of spare parts
Danger!
•
Unplug the power plug prior to any mainte-
nance work.
•
For mobile applications, the equipment
should be cleaned with clear water after every
usage.
•
For stationary installation, it is recommended
that you check the floating switch for proper
operation every three months.
•
Use a water jet to remove any lint or fibrous
particles that may have become trapped in
the housing.
•
Remove sludge from the shaft bottom and
clean the shaft walls every 3 months.
•
Use clear water to remove deposits from the
floating switch.
8.1 Cleaning the paddle wheel
If a lot of deposits collect in the housing, the bot-
tom part of the equipment must be dismantled as
follows:
1. Disconnect the intake cage from the housing.
2. Clean the paddle wheel with clear water.
Important! Do not put down or rest the
equipment on the paddle wheel!
3. Assemble in reverse order.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_GC_SP_2275_SPK13.indb 17Anl_GC_SP_2275_SPK13.indb 17 30.01.2023 10:14:4630.01.2023 10:14:46

EINHELL GC-SP 2275 Specifications

General

Type	-
Proper use	Pond
Product color	Black, Red
Housing material	Plastic
Suitable for indoor use	No
Suitable for outdoor use	Yes
Flow rate	7500 l/h
Maximum delivery height	6 m
Maximum operating pressure	- bar
Maximum input water temperature	35 °C
Package depth	169 mm
Package width	222 mm
Package height	278 mm
Package weight	3700 g
Quantity per pack	1 pc(s)
AC input voltage	230 V
AC input frequency	50 Hz
Cable length	10 m
Connecting thread type	G1 1/2

Weight and Dimensions

Weight	2300 g