EINHELL GE-DP 900 Cut User Manual

GB
- 14 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 4)
1. Danger! - Read the operating instructions to
reduce the risk of injury.
1. Safety regulations
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
This equipment can be used by children of 8 ye-
ars and older and by people with limited physical,
sensory or mental capacities or those with no ex-
perience and knowledge if they are supervised or
have received instruction in how to use the equip-
ment safely and understand the dangers which
result from such use. Children are not allowed
to play with the equipment. Unless supervised,
children are not allowed to clean the equipment
and carry out user-level maintenance work.
Danger!
The pump must be powered via an earth-
leakage circuit breaker (RCD) with a rated
fault current of no more than 30 mA (accor-
ding to VDE 0100 Part 702 and 738).
The equipment is not designed for use in
swimming pools and paddling pools of any
kind or other bodies of water in which people
or animals may be present during operation.
It is prohibited to operate the equipment if a
person or animal is in the danger area. Ask
your electrician!
Danger!
•
Before you put the equipment into opera-
tion, arrange for a specialist to check that
the earthing, protective multiple earthing or
residual-current operated circuit-breaker cir-
cuit comply with the safety regulations of the
power supply company and work correctly.
•
The electrical plug-in connections must be
protected from wet conditions.
•
If there is a risk of flooding, place the plug-in
connections in an area which is safe from
flooding.
•
Strictly avoid pumping aggressive liquids and
abrasive substances.
•
Protect the equipment from frost.
•
Protect the equipment from dry running.
•
Take suitable measures to keep the equip-
ment out of the reach of children.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Handle
2. Floating switch
3. Universal hose connection
4. Hose connection 50 mm (2”)
5. Lock for fl oat switch
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anl_GE_DP_900_Cut_SPK13.indb 14 02.11.2021 14:20:54
www.sidirika.nikolaidi.gr

EINHELL GE-DP 900 Cut Specifications

General

Type	-
Proper use	Pond
Product color	Black, Red
Suitable for indoor use	No
Suitable for outdoor use	Yes
AC input voltage	220 - 240 V
Power source type	AC
AC input frequency	50 Hz
Maximum delivery height	11.5 m
Maximum input water temperature	35 °C
Package depth	320 mm
Package width	492 mm
Package height	300 mm
Package weight	15300 g
Quantity per pack	1 pc(s)
Cable length	10 m

Weight and Dimensions

Weight	12800 g