EINHELL GE-PP 1100 N-A User Manual

GE-PP 1100 N-A
PRODUCT LAYOUT ASSEMBLY
1. Handle
2. Power Cord
3. Outlet
4. Pump Housing
5. Intake Filter Screen
6. Base
SUBMERSIBLE CONSTANT PRESSURE PUMP
1
2
3
4
5
6
1. HOSE ADAPTOR
1. Screw a suitable connector
(not included) into the pump
housing outlet by rotating in
a clockwise direction.
2. Securely attach the
hose/tube to the
connector, t hose
clamps (not included)
if you are using
exible hose or tube,
and tighten well.
WARNING!: ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING ASSEMBLY.
NOTE: The maximum pumping rate is possible only with the largest
possible line diameter; if smaller hoses or pipes are connected, the
pumping rate will be reduced.

EINHELL GE-PP 1100 N-A Specifications

General

Brand	EINHELL
Model	GE-PP 1100 N-A
Category	Water Pump
Language	English