EINHELL GE-PP 1100 N-A User Manual

4. CLEANING
If a lot of deposits collect in the housing, the bottom part of the
pump must be dismantled as follows:
MAINTENANCE
1. Undo the 8 screws on the
underside of the pump and
remove the base.
¥ When not in use, the pump should be stored in a dry, frost free
location, keep out of children’s reach.
¥ Keep the pumps suction base clear of debris at all times.
Note: Einhell will not be responsible for any damage or injuries caused by
repair of the pump by an unauthorised person or by mishandling.
General Maintenance
2. Remove the lter screen.
3. Remove the extension ring.
4. Remove the water cover.
5. Clean all parts removed and the
exposed base of the pump with
clean water.
6. Assemble in reverse order.
IMPORTANT: DO NOT PUT
DOWN OR REST THE PUMP
ON THE EXPOSED BASE.
IMPORTANT: THE PUMP SHOULD BE CLEANED WITH CLEAR
WATER AFTER EACH USE.
WARNING!: ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.

EINHELL GE-PP 1100 N-A Specifications

General

Brand	EINHELL
Model	GE-PP 1100 N-A
Category	Water Pump
Language	English