Eizo ColorEdge CG276 User Manual (English)

Questions and Answers:

R
Robert BradleyAug 21, 2025
Why does my Eizo Monitor have no picture?
- C
  Cameron CarrilloAug 21, 2025
  If your Eizo monitor displays no picture, make sure the power cord is properly connected. Then, press the power button. If it still doesn't work, turn the main power switch on. As a next step, try turning the main power off, waiting a few minutes, and then turning it back on. You may also need to increase the Brightness and/or Gain in the Adjustment menu. Try switching the input signal, operating the mouse or keyboard, and ensure the PC is turned on. If you are using DisplayPort / HDMI, there might be a problem with the connected device. Solve that problem, turn off the monitor, and then turn it on again.
A
Alexandra AndersonAug 22, 2025
Why is my Eizo ColorEdge CG276 Monitor screen too bright or too dark?
- R
  reyesaaronAug 23, 2025
  If your Eizo monitor screen is too bright or too dark, adjust the brightness using the “Brightness” setting in the Adjustment menu. Keep in mind that the LCD monitor backlight has a limited lifespan. If the screen becomes dark or begins to flicker, it is recommended to contact your local EIZO representative.
A
alexishallAug 25, 2025
What to do if the Eizo Monitor displays a message about no signal?
- K
  Katie GeorgeAug 25, 2025
  If your Eizo monitor displays a message indicating no signal or that the input signal is out of the specified frequency range, first ensure that your PC is turned on. Check that the signal cable is properly connected. You might also need to switch the input signal using the appropriate button. Verify that your PC's resolution and vertical scan frequency meet the monitor's requirements. Rebooting the PC might also resolve the issue. Finally, check that you have selected an appropriate setting using the graphics board utility.
B
bfosterAug 26, 2025
Why does my Eizo Monitor connected with the USB cable is not detected?
- S
  stacielawrenceAug 27, 2025
  If your Eizo monitor connected with the USB cable is not detected, check whether the USB cable is connected correctly. Also, check the “Tools” – “USB Selection” settings under the Setting menu. Try changing the USB port to another one. Reboot the PC. Check whether the PC and OS are USB compliant. Finally, check the PC’s BIOS setting for USB when using Windows.
M
Mark PierceAug 28, 2025
What to do if SelfCalibration cannot be executed on Eizo Monitor?
- K
  karenchungAug 28, 2025
  If SelfCalibration cannot be executed on your Eizo monitor, check whether the date and time are set correctly. Also, check whether the mode is set. Then, check whether the calibration targets are set correctly. You can also set the SelfCalibration target using ColorNavigator.
C
Cheryl LopezAug 29, 2025
Why are the characters blurred on my Eizo Monitor?
- A
  Alicia WrightAug 29, 2025
  If the characters on your Eizo monitor appear blurred, check that your PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You can also try using the “Outline Enhancer” in the Adjustment menu to improve the clarity of the characters.
T
Tamara LevyAug 31, 2025
How to fix afterimages on Eizo ColorEdge CG276?
- J
  Jeremy MacdonaldAug 31, 2025
  Afterimages are a characteristic of LCD monitors. To minimize afterimages on your Eizo monitor, avoid displaying the same image for extended periods. Utilize a screen saver or the power-saving function to prevent static images from being displayed for long durations.
S
Shawn DavisSep 1, 2025
How to fix noise appearing on the Eizo ColorEdge CG276 Monitor screen?
- S
  Susan HerreraSep 1, 2025
  If noise appears on your Eizo monitor screen, try setting “Overdrive” to “Off” in the Adjustment menu. Also, when entering the signals of HDCP, the normal images may not be displayed immediately.
A
alexandrafosterSep 3, 2025
What to do if Eizo ColorEdge CG276 displays are abnormal via HDMI input?
- V
  Vincent WilliamsSep 3, 2025
  If your Eizo monitor displays abnormal images via HDMI input, use “Screen” - "Color Space" under the Adjustment menu to adjust it.
A
Amy TranSep 5, 2025
What to do if Eizo ColorEdge CG276 built-in calibration sensor does not come out or stays out?
- L
  Leslie MorganSep 5, 2025
  If the built-in calibration sensor on your Eizo monitor does not come out or stays out, turn off the main power, and then turn it on again a few minutes later.

Eizo ColorEdge CG276 Specifications

General

3D	No
Pixel pitch	0.2331 x 0.2331 mm
Aspect ratio	16:9
Product type	PC monitor
Response time	6 ms
Display diagonal	27 \
Display technology	LED
Viewable size diagonal	684 mm
Viewable size, vertical	335.6 mm
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	596.7 mm
Display brightness (typical)	320 cd/m²
Supported graphics resolutions	2560 x 1440, 1920 x 1080 (HD 1080)
HDCP	Yes
USB hub version	2.0
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	4
Pivot angle	0 - 90 °
Tilt angle range	0 - 25 °
Number of OSD languages	9
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	154 W
Power consumption (standby)	0.5 W
Power consumption (typical)	72 W
Power consumption (PowerSave)	0.7 W
Certification	CUDO, TUV/Ergonomics, TUV/GS, cTUVus, CE, c-Tick, CB, VCCI-B, FCC-B, ICES-003-B, RoHS, WEEE, GOST-R
Product color	Black
Market positioning	Graphics design
Cables included	AC, DisplayPort, DVI, USB
Operating temperature (T-T)	0 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth (with stand)	281.5 mm
Height (with stand)	576.5 mm
Weight (with stand)	13600 g
Depth (without stand)	92 mm
Width (without stand)	646 mm
Height (without stand)	402 mm
Weight (without stand)	9700 g