To Next PageTo Next PageWhat to do if Eizo ColorEdge CG276 displays are abnormal via HDMI input?
If your Eizo monitor displays abnormal images via HDMI input, use “Screen” - "Color Space" under the Adjustment menu to adjust it.
How to fix noise appearing on the Eizo ColorEdge CG276 Monitor screen?
If noise appears on your Eizo monitor screen, try setting “Overdrive” to “Off” in the Adjustment menu. Also, when entering the signals of HDCP, the normal images may not be displayed immediately.
How to fix afterimages on Eizo ColorEdge CG276?
Afterimages are a characteristic of LCD monitors. To minimize afterimages on your Eizo monitor, avoid displaying the same image for extended periods. Utilize a screen saver or the power-saving function to prevent static images from being displayed for long durations.
Why are the characters blurred on my Eizo Monitor?
If the characters on your Eizo monitor appear blurred, check that your PC is configured to meet the resolution and vertical scan frequency requirements of the monitor. You can also try using the “Outline Enhancer” in the Adjustment menu to improve the clarity of the characters.
What to do if SelfCalibration cannot be executed on Eizo Monitor?
If SelfCalibration cannot be executed on your Eizo monitor, check whether the date and time are set correctly. Also, check whether the mode is set. Then, check whether the calibration targets are set correctly. You can also set the SelfCalibration target using ColorNavigator.
Why does my Eizo Monitor connected with the USB cable is not detected?
If your Eizo monitor connected with the USB cable is not detected, check whether the USB cable is connected correctly. Also, check the “Tools” – “USB Selection” settings under the Setting menu. Try changing the USB port to another one. Reboot the PC. Check whether the PC and OS are USB compliant. Finally, check the PC’s BIOS setting for USB when using Windows.
What to do if the Eizo Monitor displays a message about no signal?
If your Eizo monitor displays a message indicating no signal or that the input signal is out of the specified frequency range, first ensure that your PC is turned on. Check that the signal cable is properly connected. You might also need to switch the input signal using the appropriate button. Verify that your PC's resolution and vertical scan frequency meet the monitor's requirements. Rebooting the PC might also resolve the issue. Finally, check that you have selected an appropriate setting using the graphics board utility.
Why is my Eizo ColorEdge CG276 Monitor screen too bright or too dark?
If your Eizo monitor screen is too bright or too dark, adjust the brightness using the “Brightness” setting in the Adjustment menu. Keep in mind that the LCD monitor backlight has a limited lifespan. If the screen becomes dark or begins to flicker, it is recommended to contact your local EIZO representative.
Guide to displaying, adjusting, and exiting the monitor's adjustment menu for basic operations.
Step-by-step guide for setting screen resolution on Windows and Mac OS operating systems.
Explains how to select display modes and perform advanced color adjustments like brightness and gamma.
Allows manual selection of color space (RGB, YUV) for correct color reproduction.
Resets color adjustments or all settings to their factory default values.
Configures monitor date/time and calibration schedule for automated calibration.
Initiates the built-in calibration sensor to perform an automatic calibration process.
View the results of the last SelfCalibration, including date, time, and usage.
Solutions for issues where the screen is blank, or error messages related to signal input appear.
Addresses problems like incorrect brightness, blurred characters, afterimages, noise, and screen size.
Resolves issues with the built-in calibration sensor not working or SelfCalibration failures.
General| 3D | No |
|---|---|
| Pixel pitch | 0.2331 x 0.2331 mm |
| Aspect ratio | 16:9 |
| Product type | PC monitor |
| Response time | 6 ms |
| Display diagonal | 27 \ |
| Display technology | LED |
| Viewable size diagonal | 684 mm |
| Viewable size, vertical | 335.6 mm |
| Contrast ratio (dynamic) | - |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 1.073 billion colors |
| Viewable size, horizontal | 596.7 mm |
| Display brightness (typical) | 320 cd/m² |
| Supported graphics resolutions | 2560 x 1440, 1920 x 1080 (HD 1080) |
| HDCP | Yes |
| USB hub version | 2.0 |
| VGA (D-Sub) ports quantity | 0 |
| USB Type-A downstream ports quantity | 4 |
| Pivot angle | 0 - 90 ° |
| Tilt angle range | 0 - 25 ° |
| Number of OSD languages | 9 |
| Panel mounting interface | 100 x 100 mm |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, SWE |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 154 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 72 W |
| Power consumption (PowerSave) | 0.7 W |
| Certification | CUDO, TUV/Ergonomics, TUV/GS, cTUVus, CE, c-Tick, CB, VCCI-B, FCC-B, ICES-003-B, RoHS, WEEE, GOST-R |
| Product color | Black |
| Market positioning | Graphics design |
| Cables included | AC, DisplayPort, DVI, USB |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth (with stand) | 281.5 mm |
|---|---|
| Height (with stand) | 576.5 mm |
| Weight (with stand) | 13600 g |
| Depth (without stand) | 92 mm |
| Width (without stand) | 646 mm |
| Height (without stand) | 402 mm |
| Weight (without stand) | 9700 g |
