Eizo ColorEdge CS2420 User Manual

- 18 -
Chapter 3
Advanced Adjustments/Settings
Chapter 3 Advanced Adjustments/Settings
This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu.
For the basic adjustment/setting functions using the switches on the front of the monitor, see “Chapter 2 Basic Adjustments/Settings” (page 15).
3-1. Basic Operation of the Setting menu
1.
Menu display
1. Touch any switch (except ).
The operation guide appears.
2. Select .
The Setting menu appears.
2.
Adjusting/setting
1. Choose a menu to adjust/set with , and then select
.
The Sub menu appears.
2. Choose an item to adjust/set with , and then press
.
The Adjustment/Setting menu appears.
3. Adjust/set the selected item with , and then select
.
The Sub menu appears.
Selecting
during adjustment/setting will cancel the adjustment/setting
and restore the state prior to making changes.
3.
Exiting
1. Select .
The Setting menu appears.
2. Select .
The Setting menu exits.
Note
• The contents of the guide will differ depending on the selected menu or status.

Eizo ColorEdge CS2420 Specifications

General

Screen Size	24.1 inches
Resolution	1920 x 1200
Panel Type	IPS
Aspect Ratio	16:10
Brightness	300 cd/m²
Contrast Ratio	1000:1
Response Time	15 ms (Gray-to-Gray)
Connectivity	DisplayPort, HDMI, DVI-D
Color Gamut Coverage	99% Adobe RGB
Calibration	Hardware Calibration
Stand Adjustments	Height, Tilt, Swivel, Pivot
Color Support	1.07 billion colors
Viewing Angles	178° horizontal / 178° vertical
USB Ports	2 x USB 3.0 downstream, 1 x USB 3.0 upstream