6
Chapter 1 Basic Adjustment / Setting
1-3. Using Function Buttons
Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5
( )). For information on how to set a function to each button, see “Function” (page 12).
1.
Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).
The function menu is displayed.
2.
Press the button with the target function set while the function menu is
displayed.
Note
• In dual screen mode, press (INPUT) to select a screen for performing the target function.
• When the setting of “Function Display” (page 12) is “Off”, the “INVALID FUNCTION” message is displayed if
you press a function button that cannot operate.
• When the setting of “Function Display” (page 12) is “Off”, the “UNDEFINED” message is displayed if you press
a function key assigned to “Undef”.
To Next Page
Loading...
Need help?
General