18
Chapter 3 Operating the System
Brightness / Preset / Focus
Function Description
Brightness Adjust the network camera brightness.
:
The image becomes darker.
:
Returns the brightness to the default setting.
*1
:
The image becomes brighter.
Preset Moves the camera orientation to the position registered in advance.
1. Select the preset number.
Note
• For information on registering a preset position, refer to the “Installation Manual”.
• Select to move the network camera orientation to the home position.
Focus Adjust the network camera focus.
:
The focus point moves closer.*
2
:
Automatically adjusts the focus point.*
3
:
The focus point moves farther away.*
2
*1 Setting cannot be performed when
“Protocol” is an “ONVIF” or “AXIS” network camera.
*2 Switches to manual adjustment mode when
“Protocol” is an “ONVIF” or “AXIS” network camera.
*3 Switches to automatic adjustment mode when
“Protocol” is an “ONVIF” or “AXIS” network camera.
Zoom /Position
Function Description
Zoom Adjust the network camera display magnication.
:
Zooms out.
:
Zooms in.
Position Adjusts the shooting position of the network camera.
: Adjusts the horizontal position (pan).
: Adjusts the vertical position (tilt).
Auxiliary Command
Function Description
Auxiliary
Command
Operates auxiliary functions for the network camera(s).
1. Select from the “Auxiliary Command” list box.
*1
2. Select .
*1 Auxiliary commands can only be operated with devices for which the protocol is “ONVIF” or “Panasonic”.
To Next Page
Loading...
Need help?
General