17
Chapter 3 Operating the System
●
To operate network cameras
Procedure
1. Select the network camera to operate.
Select a network camera displayed in the Live Image Screen. The frame
around the selected camera image become bold.
2. Operate each function.
Attention
• Depending on the type of the network camera you are using, some functions may not be available.
• Network cameras cannot be operated if “Protocol” is a “DirectUri”.
Note
• The network camera to be operated can also be selected by clicking on an image displayed on the Live
Image Screen with the USB mouse.
• The position at which images in the live image screen are displayed can be changed. For details, refer to the
"Installation Manual".
To Next Page
Loading...
Need help?
General