Eizo FlexScan EV2411W

17
Chapter 2 Settings and Adjustments
●
To adjust the hue [Hue]
Thisfunctionallowsyoutoadjustthehue.Ifyousetthehuetoahighvalue,
theimageturnsgreenish.Iflow,theimageturnspurplish.
Adjustable range: -32 to 32
(1) Choose <Color> from the Adjustment menu, and press .
(2) Choose<Hue>fromthe<Color>menu,andpress .
The<Hue>adjustmentmenuappears.
(3) Adjust the hue with or , and press .
Theadjustmentiscompleted.
●
To adjust the gain value [Gain]
Eachluminanceofred/green/bluecomposingthecoloriscalled“Gain”.The
gain adjustment may change the color tone of the “White” (when the max input
signal for each color is obtained)
Adjustablerange:0to100%
(1) Choose <Color> from the Adjustment menu, and press .
(2) Choose <Gain> from the <Color> menu, and press .
The<Gain>adjustmentmenuappears.
(3) Adjust the respective value of Red, Green or Blue with or , and press
.
Theadjustmentiscompleted.
2-4 Adjusting Volume [Volume]
Thisfunctionallowsyoutoadjustvolumeupordown.
Adjustable range: 0 to 20
(1) Choose <Sound> from the Adjustment menu, and press .
(2) Choose <Volume> from the <Sound> menu, and press .
Thevolumeadjustmentmenuappears.
(3) Adjust the volume with or , and press .
Theadjustmentiscompleted.
2-5 Turning off the audio output at Power
Saving mode [Power Save]
This monitor allows you to turn off the audio output from the speakers/
headphoneatthepowersavingmode.
(1) Choose <Sound> from the Adjustment menu, and press .
(2) Choose <Power Save> from the <Sound> menu, and press .
The<PowerSave>settingmenuappears.
(3) Select “On” or “Off” with or , and press .
Thesettingiscompleted.
Attention
• This function does not enable to
displayeverycolorgradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
theFineContrastmodeselected.(See
“Adjustment items in each mode” on
page 15.)
Attention
• This function does not enable to
displayeverycolorgradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
theFineContrastmodeselected.(See
“Adjustment items in each mode” on
page 15.)
Attention
• This function does not enable to
displayeverycolorgradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
theFineContrastmodeselected.(See
“Adjustment items in each mode” on
page 15.)
• The gain value may change depending
onthevalueofthecolortemperature.
• When changing the gain value, the
color temperature adjusting range is
changedto“Off”.
Attention
• This function does not enable to
displayeverycolorgradation.
NOTE
• You cannot adjust the value if the
icon is not displayed, depending on
theFineContrastmodeselected.(See
“Adjustment items in each mode” on
page 15.)
• The gain value may change depending
onthevalueofthecolortemperature.
• When changing the gain value, the
color temperature adjusting range is
changedto“Off”.
NOTE
• You can also adjust volume by
pressing
or without
displayingtheadjustmentmenu.
NOTE
• You can also adjust volume by
pressing
or without
displayingtheadjustmentmenu.