8
Chapter 1 Overview and Features
1-3 Functions and Basic Operation
To adjust the screen and color
1 Screen Adjustment
(Automatic Adjustment)
●
To adjust flickering and position
[Screen] ……………………………… see page 12
●
To adjust color gradation automatically
[Range] ……………………………… see page 14
Page 12
Analog input only
2 Screen Adjustment
(Advanced Adjustment)
[At digital signal input][At analog signal input]
●
To eliminate vertical bars [Clock*] … see page 13
●
To remove flickering or blurring
[Phase*] ……………………………… see page 13
●
To correct screen position
[Position*] …………………………… see page 13
●
To modify blurred characters/lines
[Smoothing] ………………………… see page 14
●
To set when a noise appears on the screen
[Signal Filter*] ………………………see page 28
*
Items marked with * can be adjusted with analog
input.
Page 13
Color Adjustment
Advanced Adjustment
●
“Brightness”, “Contrast”, “Temperature”,
“Gamma”, “Saturation”, “Hue” and “Gain” can be
set for each mode (Custom/sRGB/Text/Picture/
Movie).
Settable functions vary with the display mode.
Resuming the default settings
●
To reset color adjustment [Reset] … see page 24
Page 16
Main menu (Refer to page 10 for operation)
• The Adjustment menu and the FineContrast mode
name cannot be displayed at the same time.
Color Adjustment
Simple Adjustment [FineContrast mode]
This function allows easy selection of a desired
mode from fi ve modes according to monitor
application.
FineContrast mode
Page 15
Brightness Adjustment
Press or to adjust brightness.
Page 16
[At digital signal input]
[At analog signal input]
Volume Adjustment
Press or to adjust volume.
S2031W_S2431W_UM_EN.indd 8S2031W_S2431W_UM_EN.indd 8 3/29/2007 10:50:40 AM3/29/2007 10:50:40 AM
To Next Page
Loading...
Need help?
General