14
Chapter 2 Settings and Adjustments
4
Adjust the signal output range.
● To adjust color gradation automatically [Range]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1)
Choose <Range> from the <Auto
Adjustment> menu, and press
.
(2) Choose “Execute” with or , and press .
The output range is adjusted automatically.
When using the “Screen Adjustment Program”, the program is fi nished.
5
Change the smoothing setting.
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed in the “Full” or “Enlarged”
mode, the characters or lines of the displayed image may be blurred.
(1) Choose <Screen> from the Adjustment menu, and press .
(2) Choose <Smoothing> from the <Screen> menu, and press .
The <Smoothing> menu appears.
(3) Adjust the characters/lines with or , and press .
The smoothing adjustment is completed.
Attention
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
S2031W_S2431W_UM_EN.indd 14S2031W_S2431W_UM_EN.indd 14 3/29/2007 10:50:44 AM3/29/2007 10:50:44 AM
To Next Page
Loading...
Need help?
General