22
Chapter 2 Settings and Adjustments
NOTE
• The display time of the FineContrast
mode remains unchanged.
2-8 Disabling DDC/CI Communication
●
To disable DDC/CI communication
[Procedure]
(1) Press to turn off the unit.
(2) Press again while pressing .
DDC/CI communication setting is disabled.
[Resetting]
(1) Press to turn off the unit.
(2) Press again while pressing .
DDC/CI communication setting is enabled.
[Checking the setting status]
(1) Select <Information> menu in the Adjustment menu and press .
The <Information> menu appears.
(2) Pressing continuously, the DDC/CI communication setting status is
shown on the 2nd page of the information page.
2-9 Setting Adjustment Menu Display
●
To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Size> from the <Menu Settings> menu, and press .
The <Menu Size> menu appears.
(4) Select “Enlarged” using or , and press .
The menu size setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Position> from the <Menu Settings> menu, and press .
The <Menu Position> menu appears.
(4) Select a menu position with
/
/
/ , and press .
The menu position setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press .
The <Menu Off Timer> menu appears.
(4) Select “Enable” with or .
(5) Choose an Off Time (15/30/45/60 seconds) with or , and press .
The menu off timer setting is completed.
S2031W_S2431W_UM_EN.indd 22S2031W_S2431W_UM_EN.indd 22 3/29/2007 10:50:49 AM3/29/2007 10:50:49 AM
To Next Page
Loading...
Need help?
General