Eizo FLEXSCAN S2233W - Enabling;Disabling DDC;CI Communication; Setting Power Indicator ON;OFF [Power Indicator]; Setting Language [Language]; Setting Eizo Logo Display On;Off

26
Chapter 2 Settings and Adjustments
2-16 Enabling/DisablingDDC/CI
communication
This function allows you to enable/disable the DDC/CI communication.
(1) Press to turn off the monitor.
(2) Press holding down to turn on the monitor.
The Enable/Disable setting is toggled by performing the operation in step 2.
2-17 SettingPowerIndicatorON/OFF
[PowerIndicator]
This function allows you to set the power indicator (blue) ON/OFF in the
monitor ON condition.
(1) Choose <Others> from the Adjustment menu, and press .
(2) Choose <Power Indicator> from the <Others> menu, and press .
The <Power Indicator> menu appears.
(3) Select “Enable” or “Disable” with or , and press .
The setting is completed.
2-18 SettingLanguage[Language]
This function allows you to select a language for the adjustment menu or
displaying message.
Selectablelanguages
English/German/French/Spanish/Italian/Swedish/Simplied Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
.
The <Language> menu appears.
(2) Choose a language with
/ / / , and press .
The setting is completed.
2-19 SettingEIZOlogodisplayON/OFF
The EIZO logo appears on the display when turning on the monitor. This
function allows you to display, or not, the EIZO logo.
(1) Press to turn off the monitor.
(2) Press holding down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in step 2.
NOTE
• You can check the DDC/CI setting in
the <Information> menu.