- 30 -
STEP 2
Take the 4-pin PWM female connector and plug it to the male PWM
header located on the motherboard.
If possible, always use the CPU-dedicated fan headers. On the
majority of motherboards, these headers usually offer the best
PWM regulation.
STEP 2
CONNECTING THE FANS
STEP 1
To connect the fans, you might need an EK-Cable Y splitter. Connect
the female connectors from the fans with male connectors on the fan
splitter cable.
The EK-Cable Y splitter comes enclosed with the Kit.
STEP 1
Fan Splitter Cable
Fan Connector
To Next Page
Loading...
