ekwb EK-Quantum 240 - General Information on Water Block Compatibility; Enclosed in the Package

- 8 -
GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY
This CPU liquid cooling unit is pre-assembled for use with modern
Intel-desktop-socket-type motherboards. By default (out of the
box) this water block supports the following CPU sockets:
- Intel® Socket LGA-115x / LGA 1200
- Intel® Socket LGA-2066/LGA-2011(-3)
- AMD® Socket AM4*
*requires replacing the Intel® mounting plate with an AMD® one.
This product is also fully compatible with AMD® AMx/
FMx sockets but requires a user to replace the factory-
installed Intel mounting plate with an AMD® one.
- EK-Quantum Velocity universal CPU water block
- PreciseMount universal CPU mounting mechanism:
• M3 threaded thumb screws (4 pcs)
• LGA-2011 M3 threaded mounting studs (4 pcs)
• Springs (4 pcs)
• M3 threaded thumb nuts (4 pcs)
• M4 PVC washers (5 pcs)
- EK-Velocity backplate (Intel, AMD)
- Allen (hex) key 2.5mm
- Additional inserts and jet plates:
• Jet J2 (0.8mm thick)
- Thermal Grizzly Hydronaut (EKWB 1.0g) thermal grease
The following items are enclosed with the EK-Quantum Velocity water block:
ENCLOSED IN THE PACKAGE