Need help?Do you have a question about the ELAC DS-A101-G and is the answer not in the manual?
General| Amplifier Type | Class D |
|---|---|
| Channels | 2 |
| Frequency Response | 20 Hz - 20 kHz |
| DAC | Yes |
| Wireless | Bluetooth |
| Input Sensitivity | 200 mV |
| Inputs | Optical, Bluetooth |
| Outputs | Subwoofer, Speaker terminals |
| Input Impedance | 47kΩ |
| Total Harmonic Distortion | <0.03% |
Controls turning the unit ON/OFF and front panel display status.
Receives IR commands from the handheld remote for system control.
Shows ON/OFF status, source, volume, and Dolby Audio™™ logo.
Allows selection and scrolling through input sources.
Adjusts volume for speakers, subwoofer, or headphones.
Connects the unit to an unswitched AC outlet for power supply.
Connects stereo audio sources via RCA cables to Line IN inputs.
Connects a second stereo audio source via RCA cables to Line 2 IN.
Connects digital audio sources via coaxial cable for Dolby Digital.
Provides analog audio output for connecting to a preamp.
Connects speakers using 16AWG (min) speaker wire.
Connects to a powered subwoofer or sub amp input.
Connects to a local network (LAN) via Ethernet cable.
Initiates pairing with Bluetooth devices for audio streaming.
Connects digital audio sources via optical cable for Dolby Digital.
Turns the amplifier unit ON or OFF using the IR remote.
Adjusts volume and controls playback functions (play/pause, tracks).
Selects audio sources connected to the amplifier's rear panel inputs.
Mutes or unmutes the audio output of the amplifier.
Proper placement for air flow and to avoid blocking vents.
Detailed steps for connecting speakers using appropriate wire.
Information on connecting audio devices and Bluetooth streaming.
How to turn the amplifier ON and OFF using remote or front panel.
Using volume controls and mute function for audio output.
Choosing input sources via IR remote or front panel controls.
Steps for pairing phone/tablet for music playback via Bluetooth.
Pairing the device with the app for setup and control.
Controls the overall output volume to speakers, sub, and headphones.
Adjusts individual source output levels for consistent volume.
Navigating to settings like Input Names, Bass/Treble, etc.
Customizing input labels to match connected devices.
Adjusting bass and treble levels for the amplifier's output.
Adjusting front panel display intensity and auto-off function.
Modifying relative volume of left/right speakers for listening position.
Teaching the amplifier to respond to commands from other remotes.
Viewing device information and checking for firmware updates.
Steps to connect the DS-A101-G to a wireless network.
Covers defects and workmanship for one year from purchase.
Details conditions and actions that void the warranty.
Contact details and procedures for service or replacement.
Information for claims outside the United States and Canada.
Lists registered trademarks and copyright holder.
To Next Page
