ELAN HOME SYSTEMS
© ELAN Home Systems 2005 • All rights reserved. Page 21
A1240 INSTALLATION MANUAL
Troubleshooting (cont.)
SYMPTOM
CAUSE
SOLUTION
Audio is Unclear, Bass
Response Low
Speakers out of phase
Verify that + of amplifier goes to +
of speaker and - of amplifier goes
to - of speaker on ALL speaker
leads.
Verify/correct speaker connections.
Amplifier Will Not
Power Up
1.Power switch is Off
Reset circuit breaker. Ensure that
combined current draw of all
devices on circuit does not exceed
the circuit’s capacity.
Incorrect Source Playing
on Speakers
1. Source connected to wrong
input of amplifier
Verify/correct input connections.
2. Speakers connected to
incorrect speaker outputs
3. DIP switches set incorrectly
Verify/correct DIP switch settings.
Turn switch On. Switch is located
on the back of unit.
2. Circuit breaker tripped
To Next Page
Loading...
