Elan M86A - M86 A Connections; TS2 Touchpads

ELAN M86A INSTALLATION MANUAL
© ELAN 2010 | All rights reserved.
Page 20
M86A Connections
TS2 Touchpads
TS2 Touchpads connect to the Zone Inputs on the M86A using Cat5 wiring.
Figure 3-3: Zone Inputs
This termination uses the ELAN standard color code as shown below.
Figure 3-4: Wiring Configuration
Each Zone Input connection can support TWO TS2s.
Use RJ45 Y-bridges like the L-com
®
ECS204-1 to facilitate wiring when connecting two
TS2s to one zone.