Elan M86A - M86 A Features

ELAN M86A INSTALLATION MANUAL
© ELAN 2010 | All rights reserved.
Page 8
M86A Features
• 8 Source, 6 Zone Controller
System Expansion to 4 M86As for 24 zones
• 30 Watts Per Channel Internal Amplifier
Produces 30W/Ch into an 8 ohm load
• Variable or Fixed Preamp Outs
Connect to external amplifiers when you need extra power, for example, in an
outdoor listening area or a large zone with multiple speakers
• TS2 Inputs (6)
Accommodates up to two TS2s per zone
• Buffered Loop Audio Outputs
Used for system expansion and to share sources with Home Theater Systems
• Routable IR Outputs
Makes IR source control connections a breeze
• Front Panel Status LEDS
Provide system status and troubleshooting feedback
• Independent Zone Control for Bass, Treble, Volume
Programmable Turn-On Settings and “On the Fly” Adjustments
• USB Port
Configuration and firmware updates
• Interfaces with the ELAN C2 Communication Controller
Enables Paging, Music on Hold and Door Station Features
• Input Source Leveling
Optimize the input level of each audio source for smooth source
switching. Available for Variable Pre-Amp outputs and speaker
outputs (not Fixed-mode Preamp Outputs).
• Sense Trigger Inputs
Enables Trigger Activated Event Maps and Conditional Programming