Elation Professional Scene Setter - Page 12

2.1.3 Program Scenes
2. Operation Guide
3. Create a desired scene using Channel Sliders
1-24. At 0% or DMX 0, these sliders should be
at 0 position, and at 100% or DMX 255, these
sliders should be at 10 position.
RECORD
PAGE
4. Once the scene is satisfactory, tap the Record
button to program the scene as a step into the
memory.
5. Repeat step 3 and step 4 until all desired steps
have been programmed into memory.
You may program up to 1000 steps into memory.
6. Select a chase bank or scene master to store
your program. Tap the Page button to select a
page(Page 1-4) to store your scenes.
1 2 3 4
9
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
1 2