Elation Professional Scene Setter - Insert a Step or Steps

2. Operation Guide
2.2 Editing
2.2.5 Delete a Step or Steps
2.2.6 Insert a Step or Steps
EXAMPLE: Delete the third step of the program on Flash button 15
on Page 2.
1. Record enable.
2. Tap the Mode Select button to select CHNS SCENE mode.
3. Tap the Page button until Page 2 LED lights.
4. Tap the Flash button 15 while pressing and holding down the Edit button, the
Scene LED lights.
5. Tap the Step button to scroll to the third step.
6. Tap the Delete button to delete the step.
7. Tap the Rec Exit button while pressing and holding down the Record button
to exit Edit mode.
1. Record a scene or scenes you wish to insert.
2. Be sure you're in CHNS SCENE and
Enter the Edit mode.
3. Tap the Step button to scroll to the step which
you wish to insert before. You may read the step
from the Segment Display.
STEP
15