20
8.4 °C / °F
Use this option to set the temperature unit that is to be used. Scroll to the required unit and then press OK.
Note : If units are set to °C in the gauge and readings are collected in a batch, then units in the gauge are
changed to °F and vice versa, on recalling the batch, the instrument will display the same value but the units
will be as per the current gauge settings, ie the reading will not be converted into °F and vice versa. 73°C
for example, would be displayed as 73°F after changing the units.
8.5 DATE/TIME
Use this option to set the date and time. The date and time are displayed on the start menu.
D
ATE
: Select the date format and enter the correct date in the chosen format. The selected format is
displayed below the input fields.
T
IME
: Select the time format and enter the correct time in the chosen format. The selected format is
displayed below the input fields.
8.6 BACKLIGHT ON
Use this option to switch the display backlight on or off. When backlight is ‘on’, the backlight will illuminate
for 16 seconds after touching a button.
Note: The backlight consumes a lot of battery power. Switching off the backlight will improve battery life.
8.7 DEVICE INFO
Displays the gauge serial number and firmware (you may be asked for this information if you need technical
support), the battery status (% full) and the memory status (% free).
To Next Page
Loading...
Need help?
General
