Name: Elcometer 456
Brand: Elcometer
Rating: 5 (1 reviews)

To Next Page

To Previous Page

www.elcometer.com 8

8 CALIBRATION METHODS (continued)

CALIBRATION METHOD

MODEL

DESCRIPTION

ISO

S, T

Sets the calibration method to Zero Offset and sets the

Counted Average to 5 - in accordance with ISO19840

SSPC PA2

S, T

Sets the calibration method to Rough/2 Point and sets the

Counted Average to 3 - in accordance with SSPC PA2

Swedish

S, T

Sets the calibration method to Rough/2 Point and sets the

Counted Average to 5 - in accordance with SS standards

Australian

S, T

Sets the calibration method to Zero Offset, and sets the

Counted Average to 5 - in accordance with AS standards

Other manuals for Elcometer 456

Questions and Answers:

Need help?

Do you have a question about the Elcometer 456 and is the answer not in the manual?

General

Model	Elcometer 456
Category	Coating Thickness Gauge
Power Supply	2 x AA batteries
Interface	USB, Bluetooth
Data Output	USB, Bluetooth
Measurement Principle	Magnetic Induction or Eddy Current (depending on probe)
Substrate	Ferrous or Non-Ferrous (depending on probe)
Units	µm, mils
Operating Temperature	-10°C to 60°C (14°F to 140°F)
Standards	ISO 2178, ISO 2360, ASTM B499, ASTM D7091
Display	LCD