14
14 EN
ELDES GATE CONTROLLER ESIM120/320 User Manual v.1.1
Delete individual user
SMS
SMS text message content:
ssss_D:ttteeellnnuumm or ssss_D:user-name
Value: ssss – 4-digit SMS password; ttteeellnnuumm – up to 15 digits user phone number;
user-name – up to 16 characters user name.
Example: 1111_D:John
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
Delete all users
SMS
SMS text message content:
ssss_D:ALL
Value: ssss – 4-digit SMS password.
Example: 1111_D:ALL
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
The user database can be exported/imported to/from a .csv le for backup purposes or for a convenient user database management. To
export/import an existing user database, please refer to the following conguration method.
Export/import
existing user database
from/to le
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
By default, the user database is enabled and output control by all database users is permitted. To deny output control instead of deleting
all users from the database, please disable the user database using one of the following conguration methods.
Disable user database
SMS
SMS text message content:
ssss_DBM_OFF
Value: ssss – 4-digit SMS password.
Example: 1111_DBM_OFF
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
To enable user database, please refer to the following conguration methods.
Enable user database
SMS
SMS text message content:
ssss_DBM_ON
Value: ssss – 4-digit SMS password.
Example: 1111_DBM_ON
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
ATTENTION: Space and colon characters are NOT allowed in the user names.
NOTE: Multiple users can be added by a single SMS text message, e. g. 1111_N:44170911XXXX1:John_ 44170911XXXX2:_ 44170911XXXX-
3:Tom
NOTE: Multiple users can be deleted by a single SMS text message, e. g. 1111_D:John_ 44170911XXXX3_Mark
For more details on output control, please refer to 11. OUTPUTS.