Eldes ESIM320 - Output Control by SMS; Timed Output ON;OFF; Setting Output Start-up State

18
18 EN
ELDES GATE CONTROLLER ESIM120/320 User Manual v.1.1
Set output pulse
duration
SMS
SMS text message content:
ssss_TIMERo:pl
Value: ssss – 4-digit SMS password; o – output number, range [1 – output C1; 2 – output C2];
pl – pulse duration, range – [1... 10] seconds.
Example: 1111_TIMER2:4
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
NOTE: ELDES Conguration Tool software allows to set the unlimited output pulse duration value.
11.3. Output Control by SMS Text Message
To open or close the gate, send the SMS text message from any of 5 available administrator phone numbers (see 10. USER PHONE NUM-
BER DATABASE for phone number management). The system will turn ON the output (-s) for a determined time period (pulse) resulting
in the gate opening or closing, depending on the current gate state. The conrmation reply by SMS text message, containing the output
name (see 11.1. Output Names), will be sent to the administrator phone number that the output control by SMS text message was ini-
tiated from.
To instantly turn ON/OFF the output and set its state to ON/OFF when the system starts-up, please refer to the following conguration
methods.
Turn ON output for
time period
SMS
SMS text message content:
ssss_Co:ON:hr.mn.sc or ssss_out-name:ON:hr.mn.sc
Value: ssss – 4-digit SMS password; o – output number, range - [1... 2]; hr – hours, range –
[00... 23]; mn – minutes, range – [00... 59]; sc – seconds, range – [00... 59]; out-name – up
to 16 characters output name.
Example: 1111_C2:ON:00.00.09
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
Turn OFF output for
time period
SMS
SMS text message content:
ssss_Co:OFF:hr.mn.sc or ssss_out-name:OFF:hr.mn.sc
Value: ssss – 4-digit SMS password; o – output number, range - [1... 2]; hr – hours, range –
[00... 23]; mn – minutes, range – [00... 59]; sc – seconds, range – [00... 59]; out-name – up
to 16 characters output name.
Example: 1111_C1:OFF:00.11.49
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
To instantly turn ON/OFF the specied output and set its state to ON/OFF when the system starts-up, please refer to the following con-
guration methods.
Turn ON output/Set
output start-up state
as ON
SMS
SMS text message content:
ssss_Co:ON or ssss_out-name:ON
Value: ssss – 4-digit SMS password; o – output number, range - [1... 2]; out-name – up to 16
characters output name.
Example: 1111_C1:ON
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.