Eldes ESIM320 - User Phone Number Database Management; Adding Users to Database

13
13EN
ELDES GATE CONTROLLER ESIM120/320 User Manual v.1.1
10. USER PHONE NUMBER DATABASE
The system comes equipped with a user database of 2000 user capacity. When the phone number is set, the user will be able to control the
output (-s) by free of charge phone call. The user database allows to assign output C1, output C2 or both outputs (simultaneous control) to
a certain user. The supported phone number format is the following:
• International (w/o plus) – The phone numbers must be entered starting with an international country code in the following for-
mat: [international code][area code][local number], example for UK: 44170911XXXX1 .
User database supports user validity and access restriction features. For more details, please refer to 10.1. User Validity and Access
Restriction.
Optionally, a user name can be set that typically species the owner’s name of a certain phone number, for example: John.
The phone number and user name (if any) are used when searching for a certain user in the database as well as they are automatically
added in the event log after the successful output control event (see 13. EVENT LOG).
Add user phone
number (and user
name)
SMS
SMS text message content:
ssss_N:ttteeellnnuumm or ssss_N:ttteeellnnuumm:user-name
Value: ssss – 4-digit SMS password; ttteeellnnuumm – up to 15 digits user phone number;
user-name – up to 16 characters user name.
Example: 1111_N:44170911XXXX1:John
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
View user phone
numbers
SMS
SMS text message content:
ssss_GETALLNUMBERS
Value: ssss – 4-digit SMS password.
Example: 1111_GETALLNUMBERS
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
Search for user by
phone number or
name
SMS
SMS text message content:
ssss_T:ttteeellnnuumm or ssss_T:user-name
Value: ssss – 4-digit SMS password; ttteeellnnuumm – up to 15 digits user phone number;
user-name – up to 16 characters user name.
Example: 1111_T:John
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
Assign output (-s) to
individual user
SMS
SMS text message content:
ssss_OUTPUT_ttteeellnnuumm_o or ssss_OUTPUT_user-name_o
Value: ssss – 4-digit SMS password; ttteeellnnuumm – up to 15 digits user phone number;
o – output number; range - [1 – output C1; 2 – output C2; 3 – both outputs]; user-name – up
to 16 characters user name.
Example: 1111_OUTPUT_44170911XXXX1_2
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.