- 11 -
Global Settings Menus
pages for detailed descriptions of each menu).
Presets
Save Preset: NavCoder right saves the preset
Edit Name: Allows you to change a preset’s name
Copy Preset: Allows for copying one preset to another preset location
Swap Presets: Swaps the location of two presets
Erase Presets: Allows you to select a preset and then erase it
Filter
Filt Mode: Low-Pass (default), Band-Pass, High-Pass
Attack Time: 1-101 (default = 50)
Decay Time: 1-101 (default = 50)
Trigger Sensitivity: 0-127 (default = 64)
Expression
EXP Mode: Volume (default), Crossfade, Warp, Filter, Freeze+Gliss,
Freeze+Volume
Heel Value: range varies depending on chosen expression mode
Toe Value: range varies depending on chosen expression mode
Reverse: Off (default)/On
No-Pedal Value: 0-127 (default = 127), only available when a plug is not
inserted into EXP/CV IN jack
Calibration: only available when a plug is inserted into EXP/CV IN jack
MIDI
MIDI Channel: Omni (default), 1-16
MIDI Thru: Off (default) / On
MIDI Keyboard: Off (default) / On
Display Options
Home View: Standard (default), Graphic, Data (Pg) 1, Data (Pg) 2,
Performance
Contrast: 1-10 (default = 10)
Name Crawl: On (default) /Off
Factory Settings
Restore: Preset 1-10, Expression, Display, All settings
Firmware Version
To Next Page
Loading...
