- 18 -
Filter (FIL)
and synth effects.
Heel - 0-100%: set the heel setting anywhere in the Filter slider’s frequency
range. 0% is the slider at minimum and 100% is the slider at maximum.
Default is 15%.
Toe - 0-100%: same as the heel setting. Default is 100%.
Reverse: Off/On. When On, swaps the heel and toe positions.
Calibration: Set>
No-Pedal Value: 0-127
Freeze+Gliss (FRG) Allows you to freeze the sound you hear at the moment
you move an expression pedal from the heel position towards the toe. When
play the dry voice over it. In between the heel and toe positions of the
expression pedal, the POG3 glissandos or slides from one frozen note to
the next. The position of the expression pedal sets the glissando speed:
the closer the pedal is to the toe position the slower the glissando rate.
Reverse: Off/On
Calibration: Set>
No-Pedal Value: 0-127
Helpful Hints: To play over the frozen sound in the full toe position, adjust
the DRY slider to the appropriate volume.
FOCUS must be enabled to freeze the +1 and +2 Octave voices.
To freeze the dry signal, ensure the DRY ATTACK button is enabled and that
the ATTACK slider is activated—set above 10%.
Freeze+Vol (FRV) Freezes your notes at the moment you move an expression
pedal from the full heel position towards the toe. The expression pedal
position then sets the volume of the freeze effect when it is located between
the heel and toe, with full volume achieved in the toe position of the
expression pedal. Please note: moving the Expression Pedal to the full heel
position erases the frozen note(s) in memory and allows you to freeze a
new chord or note.
Reverse: Off/On
Calibration: Set>
No-Pedal Value: 0-127
Helpful Hints: To play over the frozen sound, adjust the DRY slider to the
appropriate volume.
FOCUS must be enabled to freeze the +1 and +2 octave voices.
To freeze the dry signal, ensure the DRY ATTACK button is enabled and that
the ATTACK slider is activated—set above 10%.
To Next Page
Loading...
