Electro-Voice EKX-12P - Page 13

Mounting a loudspeaker on a pole
Figure 4.2: Full-Range/subwoofer stack with pole mount
!
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a pole, do the following:
1. Place the subwoofer on a level stable surface.
2. Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.
3. Turn the M20 threaded pole clockwise to secure the pole to the subwoofer.
4. Using two (2) hands lift the loudspeaker.
5. Set the pole cup located on the bottom of the loudspeaker onto the pole.
en 13
Electro-Voice User Manual 2015.01 | 02 | F.01U.308.095