Floor monitor
EKX-12P and EKX-15P loudspeakers may be used as a floor monitor by placing the loudspeaker
on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
Figure 4.3: Optimum coverage in monitor position
4.2
EKX Powered Loudspeakers
2015.01 | 02 | F.01U.308.095 User Manual Electro-Voice
To Next Page
Loading...
