To Next Page
K
Kellie WebbJul 27, 2025
Why is there no sound coming from my Electro-Voice EKX-15P Speakers?
- JJenny MillerJul 27, 2025
If your Electro-Voice speakers produce no sound, there are several possible causes: * **Amplifier Issues:** To check this, connect a working test loudspeaker to the amplifier outputs. If there's still no sound, ensure all electronics are on, the signal routing is correct, the source is active, and the volume is turned up. Correct, repair, or replace components as needed. * **Wiring Problems:** Verify you've connected the correct cables to the amplifier. Play audio at a low level through the amplifier, and connect the test loudspeaker in parallel with the malfunctioning line. If the sound disappears or is very weak, the line likely has a short. Use the test loudspeaker to check each connection/junction until you find the issue and correct it, ensuring proper polarity.
General
Weight and Dimensions
