What to do if Electro-Voice Speakers have crackling or distortion?
If your Electro-Voice Speakers have intermittent output, like crackling or distortion, check all connections at the amplifier and speakers to ensure they are clean and tight. If the problem persists, the issue might be in the amplifier or wiring. Refer to the troubleshooting steps for 'No Sound'.
Why is there distortion from Electro-Voice ELX118P Speakers when the LIMIT LED is not blinking?
If your Electro-Voice Speakers' sound is distorted, and the LIMIT LED is not blinking, the source input (mixing console/preamp) might be overdriven. Verify that the level controls of the source are properly structured.
How to eliminate buzzing, hissing, or humming from Electro-Voice ELX118P Speakers?
If your Electro-Voice Speakers are producing constant noise such as buzzing, hissing, or humming, and no program material is playing, the likely cause is the signal chain in the electronics. Evaluate each component to isolate the problem. Alternatively, check and correct the system grounding, as required, to resolve poor system grounding or a ground loop. Also, verify that the level controls of the source are properly structured and that the MIC/LINE switch is in the correct position to address an incorrect gain structure.
How to improve low-frequency response on Electro-Voice Speakers?
To improve poor low-frequency response in Electro-Voice Speakers, set the FULL RANGE / WITH SUB switch to the FULL RANGE position.
What to do if my Electro-Voice ELX118P Speakers have no sound?
If your Electro-Voice Speakers produce no sound, first check the amplifier by connecting a known working test speaker to its outputs. If there's still no sound, ensure all electronics are on, the signal routing is correct, the source is active, and the volume is turned up. Correct, repair, or replace components as needed. If the test speaker works, the issue lies in the wiring. Verify the correct wire pairs are connected to the amplifier. Play audio at a low level and connect the test speaker in parallel with the malfunctioning line. A drop or weakness in sound indicates a short circuit, possibly from a scrape, pinch, or staple. Normal sound level suggests an open wire, potentially from a cut or missed connection. Use the test speaker to check each connection until you locate and fix the p...
Details the features of the compact, powerful, and versatile 12" two-way powered loudspeaker.
Details the features of the 15" two-way powered loudspeaker, offering extended lower frequencies.
Details the features of the 18" powered subwoofer for deep, low-frequency, amplified punch.
Guidance on using ELX112P and ELX115P as floor monitors, including placement and cable routing.
Instructions for mounting ELX112P and ELX115P on tripod stands or stacking with subwoofers.
Comprehensive overview of amplifier controls, inputs, outputs, and indicator lights for versatile system use.
Illustrates and explains connecting multiple full-range systems in series for a larger sound.
Details on configuring full-range systems for use as stage monitors with instruments.
Wiring diagram for stacking full-range systems with subwoofers, connected from a mixer.
General| Impedance | 8 Ω |
|---|---|
| Subwoofer type | Active subwoofer |
| Subwoofer driver diameter | 457.2 mm |
| Subwoofer frequency range | 32 - 130 Hz |
| Subwoofer crossover frequencies | 0 - 100 Hz |
| Subwoofer driver diameter (imperial) | 18 \ |
| XLR in | Yes |
| Power source type | AC |
| Material | Wood |
| Product color | Black |
| Package weight | 39300 g |
Weight and Dimensions| Subwoofer depth | 574 mm |
|---|---|
| Subwoofer width | 507 mm |
| Subwoofer height | 661 mm |
| Subwoofer weight | 31300 g |
To Next Page
