Electro-Voice EVERSE 12 - Page 36

36 en | Amplifier DSP EVERSE Battery-powered Loudspeaker
2024-12 | 05 |
User manual
Bosch Security Systems, LLC
i
Notice!
The display returns to the home screen after 30seconds of inactivity.
FUNCTION menu
The FUNCTION menu is used to configure between MIXER and BASIC functions:
– BASIC - provides input and output gain controls, 3-band EQ, and system delay for
simplified audio setups or used as satellite or R-channel stereo setup.
– MIXER - provides full access and control of the mixer.
MODE menu
The MODE menu is used to configure the type of sound the loudspeaker delivers.
Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB.
– MUSIC - is used for recorded music playback and electronic dance music applications.
– LIVE – is used for live sound applications.
– SPEECH – is used for spoken word applications.
– CLUB – is used for recorded electronic music playback.
The default is MUSIC.
LOCATION menu
The LOCATION menu is used to optimize the loudspeaker for different boundaries.
Available options for this selection are: TRIPOD, KICKBACK, MONITOR.
– TRIPOD - is used when the loudspeaker is placed on a tripod stand or placed on a pole.
– KICKBACK - is used when the loudspeaker is placed on the angled rear kickback
position. This setting compensates for the amount of low frequency boost created by
placing the loudspeaker on a level and stable flat surface.
– MONITOR - is used when the loudspeaker is placed on the angled monitor panel in
monitor position. This setting compensates for the amount of low frequency boost
created by placing the loudspeaker on a level and stable flat surface.
The default is TRIPOD.
SUB menu
The SUB menu is used to select a high pass frequency for use with a subwoofer.
Available options for this selection are: OFF, 100Hz, 120Hz, 150Hz, ELX200-12SP,
ELX200-18SP, EKX-15SP and EKX-18SP. The 100Hz, 120Hz, and 150Hz choices are
generic high pass settings for use with other subwoofers. The ELX200-12SP, ELX200-18SP,
EKX-15SP and EKX-18SP settings are specifically optimized for subwoofers by including
delay for best summation.
The default is OFF.
TREBLE control
The TREBLE control is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter.
The default is 0dB.
MID control
The MID control is used to adjust the midrange frequency performance of the loudspeaker
for different applications or personal preference.
The default is 0dB.
BASS control
The BASS control is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a low shelving filter.