12 en | Description ZLX Portable Loudspeaker Series
2019-05 | 03 | F.01U.319.253 Installation manual Electro-Voice
2.3 Quick setup
The ZLX series loudspeakers from Electro-Voice are fully integrated audio systems with
carefully matched electronics and transducers. These products make it easy to setup a high
quality sound system quickly with a minimum amount of cables and external electronics.
Full-Range powered loudspeaker
Models: ZLX-12P , ZLX-12BT, ZLX-15P,and ZLX-15BT
To set up a full-range powered loudspeaker, do the following:
Step Illustration
1. Connect the AC power cord from a
grounded line receptacle to the MAINS
IN.
2. Connect the 3.5 mm mini jack, XLR or
TRS cable from an audio source to AUX
IN, INPUT 1 or INPUT 2.
3. Adjust the input gain to (infinity).
4. Switch POWER to ON.
5. From the DSP home screen, increase the
input gain to the desired signal level.
6. Adjust the MASTER VOL knob to the
desired volume.
See also
ā Amplifier DSP controls, page 17
To Next Page
Loading...
