Electro-Voice EVL-ZLX-12P-BT - System Status

18 en | Amplifier DSP ZLX Portable Loudspeaker Series
2019-05 | 03 | F.01U.319.253 Installation manual Electro-Voice
6. INPUT - Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
7. OUTPUT - XLR output sends the mix of all input signals to another loudspeaker or
subwoofer. INPUT LEVEL controls the signal level to OUTPUT. The MASTER VOL or DSP
control settings do not affect OUTPUT. This is also the output for the BT signal which is
configurable via the MIX OUT setting.
8. AUX IN - 3.5 mm audio jack input for connecting external audio media devices, such as
MP3 players.
4.2 System status
Normal
IN1
IN2
LEVEL 0dB
1
BT
1
2
3
4
5
6
7
S
E
Figure4.2: Normal system status home screen with Bluetooth® status
1. LEVEL – Indicates the master gain of the system in dB. The range is from mute to +10 dB,
in 1 dB increments.
2. IN1 – VU meter displays the signal level of INPUT 1 into the amplifier INPUT 1 XLR
connector. IN1 and IN2 are independent of each other.
3. IN2 – VU meter displays the signal level of INPUT 2 into the amplifier INPUT 2 XLR
connector. IN1 and IN2 are independent of each other.
4. BT - VU meter displays the signal level of wireless audio input.
5. 1 - Indicates the selected store function number. There are five user defined store
function numbers available.
6. E - Indicates the preset is not saved. When the preset is saved the E is not displayed.
7. S - Audio streaming; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
Notice!
BT and S system statuses are available for ZLX-12BT and ZLX-15BT models only.
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.