16 en | Tripod, pole mount, and floor monitor operation ZLX Portable Loudspeaker Series
2019-05 | 03 | F.01U.319.253 Installation manual Electro-Voice
3.2 Floor monitor
ZLX portable loudspeakers may be used as a floor monitor by placing the loudspeaker on the
integral monitor angle.
Setting up as a floor monitor
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level and stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
60º
OPTIMAL
COVERAGE
90º
OPTIMAL
COVERAGE
Front View Side View
Figure3.2: Optimum coverage in monitor position
To Next Page
Loading...
