ZLX Portable Loudspeaker Series Amplifier DSP | en 25
Electro-Voice Installation manual 2019-05 | 03 | F.01U.319.253
1. From the DSP menu, select RESET.
The reset are you sure message appears.
2. Select YES.
The loudspeaker restarts and resets the system to the original factory settings.
Notice!
Performing a reset erases the user customized settings saved under the STORE menu.
The five user customized settings in the STORE and RECALL menus return to <EMPTY>.
INFO menu
The Information menu is used to display the product name and firmware version.
To Next Page
Loading...
