31
Section C - Service Data
HINGE SLOT Door removed
from the range
Lock engaged
for door removal
Lock in normal
position
TO REM0VE AND REPLACE OVEN DOOR
1. Open the door to the fully opened position.
2. Pull up the lock located on each hinge support toward front of range. You may have to apply
a little upward pressure on the lock to pull it up.
3. Grasp the door by the sides, pull the bottom of the door up and toward you to disengage
the hinge supports.
Keep pulling the bottom of the door toward you while rotating the top of the door toward
the appliance to completely disengage the hinge levers.
4. Proceed in reverse to re-install the door. Make sure the hinge supports are fully engaged
before unlocking the