Electrolux EFC3862MS - Wash Cycle Table; Turning on the Appliance

Wash Cycle TableWash Cycle Table
NOTE:NOTE:
Turning On the ApplianceTurning On the Appliance
Starting a wash cycle...
Draw out the basket(see the section entitled Loading the Dishwasher ).
Pour in the detergent (see the section entitled Salt,
Detergent and Rinse Aid ).
Insert the plug into the socket. The power supply is 220-240
VAC
50 HZ, the specification of the socket is 10 A 250 VAC.
Make sure that the water supply is turned on to full pressure.
When y
ou press the Start/Pause button to pause during washing,
the program light will stop blinking and the dishwasher will mooing
every minute unless you press the Start/Reset button to start.
15
Description
Running
Energy
Program
Detergent
Pre/Main Wash
Water
Rinse
Of Cycle
Time(min)
(kWh) (L)
Aid
Pre-wash
/
15
0.020 2.5
Pre-rinse
Wash(50℃)
10g
Rinse(45℃)
30 0.540 7.0
Quick
Rinse(45℃)
Pre-wash
(45℃)
Wash(60℃)
4/12g
Rinse
140 0.980 12.5
(1 tab)
Normal
Rinse(60℃)
Drying
Pre-wash
Wash(45℃)
4/12g
230 0.584 8.0
Rinse(55℃)
(1 tab)
ECO
Drying
Pre-wash
Wash(45℃)
Rinse
4/12g
95 0.650 12.0
(1 tab)
Delicate
Rinse(55℃)
Drying
Wash(72℃)
Rinse
16g
Rinse
190 1.250 9.5
Hygiene
(1 tab)
Rinse(72℃)
Drying
Pre-wash
Wash(65℃)
4/12g
Rinse
135
0.860 9.5
Machine
(1 tab)
Care
Rinse(65℃)
Drying
NOTE:
ECO
: The ECO program is suitable to clean normally soiled tableware, that for this use, it is
the most efficient program in terms of its combined energy and water consumption,
and it is used to assess compliance
with the EU ecodesign legislation.
(*EN60436)
The table below shows which programs are best for the levels of food residue on them and how much detergent is needed. It
also show various information about the programs.Consumption values and program duration are only indicative except for
ECO program.
( ) indicates that the program uses rinse aid in the last rinse.