29
12.2 Concentrated Wash Pump
Accessibility
(Not applicable for 417 and 517 series)
Step: 1
Remove the
circlip (See
Fig. 1), loosen
the screw
(See Fig. 2),
then detach
the connector
(See Fig. 3) to
separate the
Concentrated
Wash Pump
12.4 Recirculation Pump
Accessibility
(Not applicable for 417 series)
Remove the circlip (See Fig. 1), loosen the screw (See
Fig. 2), and detach the connector (See Fig. 3) to
separate the Recirculation Pump.
12.3 Drain Pump Accessibility
Remove the circlip (See Fig. 1), loosen the screw (See
Fig. 2), then detach the connector (See Fig. 3) and
release
the snaps
(See Fig.
4) to
separate
the Drain
Pump.
12.5 Leveling Leg Accessibility
Incline the Dryer as shown
(Fig. 1). Loosen the Leveling
Leg with the help of a
wrench (Fig. 2). Similarly,
remove the rear side
Leveling Leg by inclining the
Washer in other direction.
12.6 Drum Light
Accessibility
(Not applicable
for 417 series)
Remove the Drum Light
from the Bellow as shown in
(Fig. 1). Remove the splice
(Fig. 2) to take out Drum
Light from the Washer.
Front Panel Accessibility
To Next Page
Loading...
