STEAM COOK (with Automatic Programs)
1. Turn the Menu Dial knob (
) to adjust to STEAM COOK ( ).
2. Turn the Control Dial knob (
) to select STEAM COOK menu.
(example : fresh vegetable 1 (soft) )
• Three little horizontal bars turn on in the left side of the display and one of them blinks.
• It means an indicator of the place where the metal tray and the grill rack is laid.
• If the second bar is blinking, it means a designated accessory is supposed to be laid
on the second level in the oven.
3. Press the Selection button (
).
4. Turn the Control Dial knob (
) to enter the cooking quantity.
(Refer to the steam cook chart on the next page)
5. Press the Selection button (
).
6. Press the Start button (
).
The cooking time is automatically determined by the cooking quantity.
7. The display shows “End” and beep sounds when the cooking is completed.
This function allows you to cook some kind of steam cook easily and automatically.
Please put the metal tray and the grill rack on the second level.
Make sure that water is enough in the water tank before cooking.
NOTE:
•
Use only potable water(purified) for the water tank.
•
Do not use hot water for the water tank.
• Discard any water in the water tank after finishing steam boiler cleaning.
• When Water Replenishment ( ) would light up in the display,...
- Although it would be lack of water in the water tank during oven's working, it will keep on
working without steam feature. If you would get to bump into this situation, you need to fill
the water tank up with water. Then press STEAM button ( ) once.
Quick
Defrost
Power
SteamClean
Start/
+30sec
Stop/
CancelSelection
MENU CONTROL
EMS3477X(KOS-1C5K5R)(영)_E-LUX.indd 16 2014-10-06 오전 11:44:43