Electromed SmartVest - Cautions

SmartVest SQL Airway Clearance System
www.smartvest.com
3
www.smartvest.com
Safety
Federal law restricts this device to sale by or on the order of a
physician.
Do NOT operate the SmartVest SQL Airway Clearance System on any soft
surface such as a carpet or towel while in the horizontal (flat) position as
the cooling fan may be blocked.
Do NOT attempt to repair the system yourself. If you experience
any problems, contact Electromed at (888) 966-2525 or your service
representative.
To report unexpected operation or events, contact Electromed at (888)
966-2525 or your service representative.
Use only compatible SmartVest SQL Airway Clearance System components
supplied by Electromed.
Do NOT staple, sew, or apply any items to the SmartVest shell that could
penetrate the inner bladder.
Do NOT apply adhesives, tapes, hot glue or hot irons to the SmartVest
shell while inner bladder is installed.
Do NOT allow any foreign materials to enter the SmartVest SQL Airway
Clearance System through openings in the device, hose, or garment.
Moving air in the SmartVest garment along with multiple layers of
clothing may cause you to become warm during use. Use system in a
cooled or ventilated room and wear a single layer of clothing underneath
the SmartVest garment.
Do NOT share or allow a different patient to use your SmartVest or
SmartVest Wrap garment. Doing so may lead to cross contamination of
harmful microorganisms.
Do NOT place generator in a position that limits access to the electrical
inlet connection.
Cautions