SmartVest
SQL
Airway Clearance System
www.smartvest.com
11
Connecting Hose
Connecting Hose
The single-hose transmits air pulses from the air pulse generator to the garment.
The hose connection point is the same on both ends. Therefore, whether
connecting to the generator or the garment, the insertion steps are the same.
Steps:
1. With one hand supporting either the generator or the garment connection
point, use the other hand to insert the hose connector.
2. Give a slight twist.
NOTE: It is not necessary for all three o-rings on the connector to be fully
inserted for a proper seal.
Correct Connection
To Next Page
Loading...
