5 Maintenance
1.If Z axis keeps making friction noises, please adds some lubricant to it.
2.Please do not use sharp or pointy objects to scrape the release liner film in case of damages.
5.Please clean up the build platform by using tissues or ethyl alcohol once you complete printing.
6.Please clean up the resin tank before changing another colors of resin.
3.Be careful when you remove the build platform in case you may damage the 4K LCD screen.
4.Remember to pour the rest of the resin from the tank back into the resin bottle and seal it well
if you don’t use the printer in the next 48 hours.
And if there are any residues please use a filter to filter them out.
To Next Page
Loading...
