Software Installation and Setup
3.2 Build Volume
You don't need to change the default parameters (See Picture 13), and X indicates the maximum
print size in the X-axis direction, and so on.
Elegoo Voxeldance Tango
Other operations:
1) Click on the model, left-click and long-press the center point of the model, and drag the model
to the position you want.
2) Scroll the mouse wheel to zoom in or zoom out the model.
3) Long press the right mouse button and rotate to see different perspectives of the model.
3. Voxeldance Tango Setting
3.1 Click "Parameter Settings" and choose ELEGOO MARS 4 as your default printer.
(See Picture 12)
（Picture 12） （Picture 13）
To Next Page
Loading...
